LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (Lubrication System (Service Information - 1.4L - CZCA, CZDA, CZTA)) >> 17 Lubrication >> Engine Oil Cooler >> Engine Oil Cooler, Removing And Installing >> Installing

Engine Oil Cooler, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Install new O-rings

Install in reverse order of removal and note the following:

-- Install the intake manifold. Refer to INTAKE MANIFOLD, REMOVING AND INSTALLING .

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING - Check the coolant level. .

scientia non olet · About LEMON Manuals