Checking Cylinder Bores
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Never handle the cylinder bore with service equipment (drilling, honing, lapping).
-- Using the :VAS6078 , measure in a diagonal sequence at three positions transversely -A- and longitudinally -B-.
- Maximum variance from the specified size: 0.08 mm.
| Cylinder Bore Diameter In mm | |
|---|---|
| Specified size | 74.5 + 0.015 +0.005 |
NOTE:
The cylinder bore must not be measured when the cylinder block is mounted on the :VAS6095A because the measurements may be incorrect.