Oil Spray Jets, Removing And Installing: Installing
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Never bend the oil spray jets.
Install in reverse order of removal and note the following:
- Installation position: the guiding edge of the oil spray jet -2- to the machined surface of the cylinder block.
- Bolt with Pressure Relief Valve
- Oil Spray Jet
-- Install the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .
-- Install the noise insulation. Refer to NOISE INSULATION .