Ribbed Belt, Removing And Installing, Vehicles Without A/C Compressor: Removing
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
-- To release the tension on the ribbed belt, turn the tensioner counter-clockwise in the direction of -arrow-.
 Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
|
-- Lock the tensioner using the :T10060A
.
-- If the ribbed belt is to be reused, mark the running direction with chalk or a felt-tip pen for reinstallation.
-- Remove the ribbed belt.