Ribbed Belt, Removing And Installing, Vehicles With A/C Compressor: Removing
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
-- If the ribbed belt is to be reused, mark the running direction with chalk or a felt-tip pen for reinstallation.
-- Position the tool -3- on the hex fitting of the tensioner -1-.
-- To release the tension on the ribbed belt, push the tool -3- in the direction of -arrow-.
-- Use the :T10060A -2- to secure the tensioner -1-.
-- Remove the ribbed belt -4-.