LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Engine System (Crankshaft & Cylinder Block - Service Information - CZCA, CZDA, CZTA)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Overview - Belt Pulley Side Sealing Flange >> Tightening Specifications For TDC Hole In Rear Cylinder Block

Tightening Specifications For TDC Hole In Rear Cylinder Block

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
GWWS15-10015Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Plug with integrated seal -arrow-.

-- Replace if damaged.

Component Tightening Specification
Bolt -arrow- 30 Nm
scientia non olet · About LEMON Manuals