Ribbed Belt Pulley Side Sealing Flange Tightening Specifications And Sequence
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- Replace the bolts that were tightened with an additional turn.
-- Tighten the bolts -1 to 12- in steps:
| Step | Component | Tightening Specification/Additional Turn |
|---|---|---|
| 1 | Bolts -1 to 12- | Install by hand all the way |
| 2 | Bolts -1 to 12- | 8 Nm |
| 3 | Bolts -7 and 8- | 20 Nm |
| 4 | Bolts -1 to 12- | in a diagonal sequence 90° additional turn |