LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 219 (Engine Assembly System (Service Information - CZCA, CZDA, CZTA)) >> 10 Engine Assembly >> SUBFRAME Mount >> Pendulum Support, Removing And Installing >> Removing

Pendulum Support, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to NOISE INSULATION .

-- Remove the bolts -1, 2 and 3- and remove the pendulum support.

GWWN10-10677Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals