LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 219 (Engine Assembly System (Service Information - CZCA, CZDA, CZTA)) >> 10 Engine Assembly >> SUBFRAME Mount >> Pendulum Support, Removing And Installing >> Installing

Pendulum Support, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

NOTE:

Threaded inserts (for example, "Heli Coil") are located in the fastening holes for the pendulum support.

GWWN34-10980Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Characteristics: Section on first thread -arrow-.

scientia non olet · About LEMON Manuals