Tightening Specifications
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
|
-- Replace the bolts that were tightened with an additional turn.
-- Tighten the bolts in the steps shown in the sequence:
| Step |
Component |
Tightening Specification/Additional Turn |
| 1 |
Bolts -1 to 3- |
7 Nm |
| 2 |
Bolts -1 to 3- |
40 Nm |
| 3 |
Bolts -1 to 3- |
90° additional turn |