Turbocharger, Removing And Installing: Notes
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Engine Bung Set :VAS6122
- Hose Clip Pliers :VAS6362
- Socket T30 :T10405
- Mini Torque Wrench :VAS6854
- Torque Wrench 1783 - 1/4" Drive Ratchet : VAS6234
- Intake Manifold Release Tool :T10527
- Intake Manifold Release Tool - 1 :T10527/1
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- O-rings - Oil supply line
- O-rings - Crankcase ventilation hose
- O-rings - Coolant pipe
- Nuts - Turbocharger
- Seal - Turbocharger
- Gasket - Turbocharger