Overview - Turbocharger, Version 1
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- Turbocharger
- Removing and installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
- Bolt
- 8 Nm
- Connection
- O-Ring
- Replace after removing.
- Coat with clean engine oil before assembly
- Seal
- Replace after removing.
- Heat Shield
- Bolt
- 25 Nm
- Bolt or Nut
- 8 Nm
- Nut
- 14 Nm
- Replace after removing.
- Bolt
- 9 Nm
- Replace after removing.
- Clip
- Replace after removing.
- Operating Lever
- Lock Nut
- 6 Nm
- Secure with sealing wax
- Charge Air Pressure Actuator -V465-
- Different versions of the charge air pressure actuator may be installed.
- Removing and installing. Refer to Charge Air Pressure Actuator -V465-, REMOVING AND INSTALLING .