Charge Air Cooler, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install in reverse order of removal and note the following:

-- Install the sealing strip -1- on the charge air cooler -2- in direction of -arrow-.

-- Install the new seal into the groove in the intake manifold.

-- Tighten the bolts -arrows- diagonally starting from the center and working outward.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the clamps -1-.

NOTE:

If there are small impressions on the slats. Refer to RADIATOR AND CONDENSER ASSEMBLY .

-- Install the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .

-- Check the coolant level. Refer to COOLANT, DRAINING AND FILLING - Check the coolant level. .