Engine Coolant Temperature Sensor on Radiator Outlet -G83-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Replace the O-ring.

To prevent coolant loss, immediately insert the new Engine Coolant Temperature Sensor -G62- in the connection.

-- Install the front noise insulation. Refer to NOISE INSULATION .

-- Check the coolant level. Refer to COOLANT, DRAINING AND FILLING .