Coolant Pump, Removing And Installing: Notes
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Refractometer:T10007A
- Shop Crane - Drip Tray:VAS6208
- Hose Clip Pliers:VAS6340
- Cooling System Charge Kit:VAS6096
- Cooling System Tester - Adapter:VAG1274/8
- Electronic Torque Wrench 3-60Nm:VAS6583
- Torque Wrench 1410:VAG1410
- Intake Manifold Release Tool:T10527
- Intake Manifold Release Tool - 1:T10527/1
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Seal - Coolant thermostat housing