LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Crankshaft & Cylinder Block (General & Service Information - CBPA, CKJA) >> 13 Crankshaft, Cylinder Block >> Piston And Connecting Rod >> Pistons And Cylinder Bore, Checking >> Checking Cylinder Bores

Checking Cylinder Bores

GWWV13-0280Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special Tools And Workshop Equipment Required 

-- Measure diagonally at three positions transversely -A- and longitudinally -B-.

NOTE:

Cylinder bore must not be measured if cylinder block is secured to assembly stand or else results may be incorrect.

Incorrect measurements will result.