Ribbed Belt, Removing And Installing: Removing

-- Remove the noise insulation. Refer to NOISE INSULATION .

CAUTION:

Risk of destroying due to reversed running direction on a used ribbed belt.

If the ribbed belt is going to be installed again, mark the running direction with chalk or a marker.

-- Tilt the tensioner in the direction of -arrow- to release the tension on the ribbed belt.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Secure the tensioner with :T10060A .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the ribbed belt.