Version 1
Right and left coupling with release buttons -arrows-.
Opening
It is necessary to counterhold the fuel separating point -1- inside the engine compartment.
-- Insert the :T10468 between the heat shield and the fuel line stop -arrow- -2- and counterhold it.
Continue for all separation points on the fuel system:
-- Push the connector coupling -1- in direction of -arrow A-.
-- Press the release button and hold it down.
-- Disconnect the connector coupling -1- from the fuel line -2- in the direction of -arrow B-.
Follow the color coding when installing. Refer to Coupling Allocation .
The connector couplings must >>audibly<< engage when locking.
-- Pull on the connector coupling to make sure it is secure.