Right Seal, Replacing: Installing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Lightly oil the new gasket on the outer edge.

-- Fill the space between the sealing/dust lip halfway with Sealing Grease -arrow- for a new seal.

-- Install the seal all the way in without tilting it.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the flange shaft.

-- Tighten the flange shaft bolt to the tightening specification. Push the flange shaft against the transmission so that the bolt engages in the thread.

-- Attach the right drive axle to the flange shaft or install the right drive axle. Refer to DRIVE AXLE .

-- Install the heat shield over the right drive axle, if removed. Refer to DRIVE AXLE ..

-- Check the transmission fluid and fill if necessary. Refer to TRANSMISSION FLUID LEVEL, CHECKING .

-- Install the noise insulation. Refer to NOISE INSULATION .