Left Seal, Replacing: Removing
-- Press the brake and remove the bolt from the left drive axle -arrow- (second technician).
NOTE:
From now on do not let the vehicle touch the ground. Refer to DRIVE AXLE .
-- Remove the left front wheel.
-- Remove the noise insulation. Refer to NOISE INSULATION . .
-- Remove the left front wheel housing liner. Refer to WHEEL HOUSING LINER .
-- Remove the left drive axle. Refer to DRIVE AXLE .
-- Place the :SMN372500 or Drip Tray under the transmission.
-- Remove the flange shaft bolt, by installing two bolts into the flange and counter-holding the flange shaft using a tire iron.
-- Remove the flange shaft together with the pressure spring.
-- Remove the flange seal using the :VW771 and :VW771/37 .