Left Seal, Replacing: Installing
-- Lightly oil the new gasket on the outer edge.
-- Fill the space between the sealing/dust lip halfway with Sealing Grease -arrow- for a new seal.
-- Install the seal all the way in without tilting it.
-- Install the flange shaft.
-- Tighten the new flange shaft bolt to the tightening specification. Push the flange shaft against the transmission so that the bolt engages in the thread.
-- Install the left drive axle. Refer to DRIVE AXLE .
-- Install the left front wheel housing liner. Refer to WHEEL HOUSING LINER .
-- Attach the left wheel. Refer to WHEELS AND TIRES .
-- Check the transmission fluid and fill if necessary. Refer to TRANSMISSION FLUID LEVEL, CHECKING .
-- Install the noise insulation. Refer to NOISE INSULATION .