Overview - Rear Lid
- Rear Lid
- Removing and Installing. Refer to REAR LID, REMOVING AND INSTALLING .
- Adjusting. Refer to REAR LID, ADJUSTING .
- Wiring Harness
- Adjusting Buffer
- Left and right
- Adjusting. Refer to REAR LID, ADJUSTING .
- Latch
- With emergency release
- Removing and Installing. Refer to LATCH, REMOVING AND INSTALLING .
- Hinge
- Removing and Installing. Refer to HINGES, REMOVING AND INSTALLING .
- Gas-Filled Strut
- Removing and Installing. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .
- Venting. Refer to GAS-FILLED STRUT, VENTING .
- Striker
- Removing and Installing. Refer to STRIKER, REMOVING AND INSTALLING .
- Adjusting. Refer to REAR LID, ADJUSTING - Striker, Adjusting .
- License Plate Lamp
- Removing and installing. Refer to LICENSE PLATE LAMP .
- Rear Lid Release Button
- Removing and Installing. Refer to ACTUATOR, REMOVING AND INSTALLING .