LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 44 (Engine Mechanical (Cylinder Head & VALVETRAIN System - Service Information - 2.0L - CVCA, CUUA, CUUB, DELA, DEBA, DEJA, DGMA)) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Cylinder Head Cover, Removing And Installing >> Installing

Cylinder Head Cover, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal and note the following:

NOTE:

Replace the O-ring.

Replace the cylinder head cover gasket and the cylinder head cover bolts if they are damaged or if there are leaks.

-- Install the vacuum hose. Refer to CONNECTION DIAGRAM - VACUUM SYSTEM .

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals