Clamps Installed Position

WARNING: This page is about a different car, the 2014 Volkswagen Jetta, 2013 Volkswagen Jetta, 2012 Volkswagen Jetta, and 2011 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Clamp Installed Position Between Particulate Filter And Turbocharger

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the new clamp so the bolt head faces down and the clamp horizontal -+/- 10°- angle is maintained.

Fig 2: Clamp Installed Position Between Particulate Filter And Exhaust Gas Recirculation (EGR) Filter

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the new clamp so the bolt head faces down and the clamp horizontal -+/- 10°- angle is maintained.

Engine Code CJAA

Fig 3: Identifying Installed Position Of Clamp Between Exhaust Door Control Unit And NOx Reduction Catalytic Converter

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the new clamp maintaining the -45° +/- 10°- angle.