LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Body Front (Sedan)) >> 50 Body Front >> Removal And Installation >> Noise Insulation And Foam Pieces, Fender And Fender End Plate

Noise Insulation And Foam Pieces, Fender And Fender End Plate

WARNING: This page is about a different car, the 2014 Volkswagen Jetta, 2013 Volkswagen Jetta, 2012 Volkswagen Jetta, and 2011 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The graphic below shows the left side. The right side is identical.

There may be different noise insulation and foam pieces installed.

Fig 1: Identifying Noise Insulation
GWWM50-10052Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Noise Insulation, Fender End Plate
    • Installed in front of the fender end plate
    • Not installed in all models
  2. Foam Piece
    • Inserted between the fender and the wheel housing longitudinal member