Fuel Level Sensor -G-

WARNING: This page is about a different car, the 2014 Volkswagen Jetta, 2013 Volkswagen Jetta, 2012 Volkswagen Jetta, and 2011 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Observe the safety precautions when working on the fuel supply system. Refer to SAFETY PRECAUTIONS .
Observe the rules for cleanliness. Refer to CLEAN WORKING CONDITIONS .

Always follow these instructions before and during work.

Removing

-- Remove the fuel delivery unit. Refer to FUEL DELIVERY UNIT .

-- Disengage the wire connectors -1 and 2- and disconnect.

Fig 1: Identifying Connectors & Retaining Tabs/Lugs

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Lift the retaining tabs -3 and 4- with a screwdriver and pull the Fuel Level Sensor -G- downward and off in the -direction of arrow-.

Installing

-- Insert the Fuel Level Sensor -G- in the guides on the fuel delivery unit and push upward until it engages in the retaining tabs.

-- Connect the connectors and check for secure locking.

-- Install the fuel delivery unit. Refer to FUEL DELIVERY UNIT .