LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 201 (2.0L - Engine Mechanical (Cylinder Head, VALVETRAIN) - Engine Code(S): CBPA & CKJA (Sedan)) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Notes

15 Cylinder Head, VALVETRAIN: VALVETRAIN: Notes

WARNING: This page is about a different car, the 2014 Volkswagen Jetta, 2013 Volkswagen Jetta, 2012 Volkswagen Jetta, and 2011 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Cylinder heads with cracks between the valve seats, or between the valve seat and the spark plug threads, can continue to be used without reducing the service life, as long as the cracks have a width of max. 0.3 mm, or only the first 4 threads of the spark plug threads are cracked.

After installing new hydraulic valve lifters, the engine may not be started for approximately 30 minutes. Otherwise the valves will impact the pistons.

Turn over the engine carefully at least two turns after working on the valvetrain. This assures the valve do not strike the piston when starting the engine.