Special Tools

Special tools and workshop equipment required 

• Straight Edge 500 mm VAS 6075
• Thrust Piece T10368
• Compression Tester V.A.G 1763
• Adapter V.A.G 1763/6
• Locking Pin T10060 A
• Thrust Piece T10174
• Spark Plug Removal Tool 3122 B
• Valve Seal Removal Tool 3364
• Valve Stem Seal Driver3365
• Adapter T40012
• Valve Cotters Asm/Disasm Device VAS 5161
• Guide Plate for FSI Engine VAS 5161/19B
• Dial Gauge Holder VW 387
  Fig 1: Dial Gauge Holder VW 387

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Dial Gauge 0-10 mm VAS 6079
  Fig 2: Dial Gauge 0-10 mm VAS 6079

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Torque Wrench V.A.G 1783
  Fig 3: Identifying Torque Wrench V.A.G 1783

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Open End Spanner Insert AF 10 V.A.G 1783/1
  Fig 4: Identifying V.A.G 1783/1

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Thrust Piece T10354
  Fig 5: Identifying Thrust Piece T10354

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Pulling Hook T20143
  Fig 6: Extractor Hook T20143

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Puller T10394
  Fig 7: Identifying Puller T10055

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Puller T10055
  Fig 8: Identifying Puller T10055

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 9: Identifying Engine Support Bridge Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Engine Support Bridge10 - 222 A
• Spindle10 - 222 A /11
• Engine Support Bridge - Engine Support 2810 - 222 A /28
• Fuel Injection Gauge Kit - Fuel Bleeder 3110 - 222 A /31
• Rail with Holes T40091/2 from Engine Support Basic Set T40091
• Mount T40093/5 from Engine Support Supplement Set T40093
• 2 x Engine Support Adapter10 - 222 A /28-2
• 2 x Square Pipe T40091/1 from Engine Support Basic Set T40091.
• 2 x Movable Joint T40091/3 from Engine Support Basic Set T40091.
• 2 x Movable Joint T40093/4 from Engine Support Supplement Set T40093.

Fig 10: Identifying Engine Sling 2024 A And Special Tools

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Engine Sling 2024 A
• Engine Support T10014
• Assembly Tool T10352
• Counter Hold Tool T10355
• Locking Pin T40011
• Ignition Coil Puller T40039

Fig 11: Identifying Torque Wrench V.A.G 1331 And Special Tools

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Torque Wrench (5-50 Nm) V.A.G 1331
• Torque Wrench (40-200 Nm) V.A.G 1332
• Shop Crane-Load Cap = 700-1200 KG VAS 6100
• Engine Bung Set VAS 6122
• Drip Tray for VAS 6100 VAS 6208 or V.A.G 1306
• Polydrive Bit and Drive Socket T10070

Fig 12: Identifying Engine Support Bridge And Special Tools

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Engine Support Bridge10-222 A
• Bracket with Spindle and Hook10-222 A/10
• Shackle10-222 A/12
• Adapter10-222 A/13)
• Locking Pin T10060 A
• Bits T10099