LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (2.0L - Engine Mechanical (Cylinder Head, VALVETRAIN) - Engine Code(S): CBFA & CCTA (Sedan)) >> 15 Cylinder Head, VALVETRAIN >> Removal And Installation >> Vibration Damper Seal, Replacing >> Removing

Vibration Damper Seal, Replacing: Removing

WARNING: This page is about a different car, the 2013 Volkswagen Jetta and 2012 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the vibration damper. Refer to VIBRATION DAMPER .

-- Install the Sleeve T10368.

Fig 1: Identifying Special Tool T10368
GWWA15-10471Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Use the pulling hook T20143/2 to remove the seal.

scientia non olet · About LEMON Manuals