LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (2.0L - Engine Mechanical (Cylinder Head, VALVETRAIN) - Engine Code(S): CBFA & CCTA (Sedan)) >> 15 Cylinder Head, VALVETRAIN >> Removal And Installation >> Engine Cover >> Installing

Engine Cover: Installing

WARNING: This page is about a different car, the 2013 Volkswagen Jetta and 2012 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Make sure the rubber grommets fit correctly into the mounts when installing.

Fig 1: Identifying Correct Installation Of Rubber Insulators
GWWN01-11046Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Carefully press the engine cover onto the ball studs.

NOTE:

To prevent damage, do not hit the engine cover with a fist or tools.

scientia non olet · About LEMON Manuals