Removal And Installation: Camshafts: Notes
WARNING: This page is about a different car, the 2013 Volkswagen Jetta and 2012 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Thrust Piece T10174
- Assembly Tool T10352
- Counter Hold Tool T10355
- Locking Pin T40011
- Ignition Coil Puller T40039
- Torque Wrench (5-50 Nm) V.A.G 1331
- Silicone Sealant D 154 103 A1
- Cable Ties
- Flat Scraper
- Hand Drill with Plastic Brush Attachment
- Protective Eyewear