Camshaft Axial Clearance, Checking

WARNING: This page is about a different car, the 2013 Volkswagen Jetta and 2012 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Dial Gauge Holder VW 387
Dial Gauge 0-10 mm VAS 6079

Test Sequence:

Fig 1: Dial Gauge VAS 6079 Secured To Cylinder Head With Universal Dial Gauge Holder VW 387

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Perform the test with cylinder head cover removed.

-- Place the camshaft to be checked in the cylinder head.

-- Secure the dial gauge 0-10 mm VAS 6079 to the cylinder head using the dial gauge holder VW 387.

-- Press the camshaft again the dial gauge by hand.

-- Set the dial gauge to "0".

-- Push the camshaft off the dial gauge and read the value:

Axial clearance: 0.05 to 0.17 mm.