LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (2.0L - Turbocharger, Supercharger - Engine Code(S): CBEA & CJAA (Sedan)) >> 21 Turbocharger, Supercharger >> Description And Operation >> Vacuum Hose Connection Diagram

Vacuum Hose Connection Diagram

WARNING: This page is about a different car, the 2014 Volkswagen Jetta, 2013 Volkswagen Jetta, 2012 Volkswagen Jetta, and 2011 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

When routing the vacuum hoses, make sure they are not kinked, twisted or pinched. They could disable the vehicle.

Fig 1: Identifying Vacuum Hose Connection Diagram
GWWM21-0192Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Vacuum Diaphragm
    • On the turbocharger.
    • With the Charge Pressure Actuator Position Sensor -G581-.
  2. Wastegate Bypass Regulator Valve -N75-
  3. From the Brake Booster
  4. To the Vacuum Pump
  5. Connection Piece
    • At the vacuum pump.
  6. Check Valve
    • Pay attention to the installed position: the white connection faces the junction piece, refer to -item 10-.
    • Checking, refer to VACUUM SYSTEM, CHECKING .
  7. Air Filter Housing
  8. Muffler
  9. Cylinder Head Cover
  10. Junction Piece