Seat Position Sensor: Removing
WARNING:
- Follow all safety precautions when working on the airbag, refer to AIRBAG SYSTEM SAFETY PRECAUTIONS and passenger occupant detection system passenger airbag deactivation. Refer to PASSIVE OCCUPANT DETECTION SYSTEM SAFETY PRECAUTIONS .
- Before handling pyrotechnical components (for example, disconnecting the connector), the person handling them must "discharge static electricity". For example, by briefly touching the door striker pin.
-- Remove the passenger seat. Refer to FRONT SEAT .
-- Remove screw -3- and (0.3 Nm) and seat position sensor -4- from the seat pan lower frame.
CAUTION:
Do not damage the insulation on the individual wires.
-- Cut protective hose -2- to just in front of clip -1-.
-- Cut through both electrical wires at the places marked with -arrow A- and -arrow B- to approximately 1/3 to 2/3 of the free length.