Front Passenger Seat Occupant Sensor G128: Installing

-- Press wiring harness in positioning aid area -1- in rear padding channel.

-- Press the wiring harness into the recess in the padding at the areas indicated by the -arrows A and B-.

-- Align sensor positioning aid -3- with padding positioning aid -2-.

Fig 1: Identifying Sensor Positioning Aids

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Secure aligned sensor -1- with right hand, remove adhesive tape strips -2- and affix sensor to padding.

-- Press wiring harness in rear area into padding opening -arrow-.

Fig 2: Securing Aligned Sensor With Right Hand, Removing Adhesive Tape Strips And Attaching Sensor To Padding

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Connect wiring harness with vehicle electrical system.

Installing of remaining components is reverse of removal.

-- After installing, perform a function check with ignition on.