Driver Side Airbag Unit, Through 05.2011: Installing
-- Check whether wiring harness -3- is routed as shown in the illustration.
-- Insert airbag connector -2- into connector coupling. Airbag connector must engage audibly.
-- Insert connector -1- into connector coupling.
-- Push airbag unit into steering wheel.
-- Check whether airbag unit is engaged on the left and right-hand side of the steering wheel.
-- Switch on ignition.
WARNING:
Make sure no one is in the vehicle.
-- Connect the battery. Refer to [For transmission(s) 0A6, 09M] Removal and Installation