Driver And Passenger Side Airbag: Removing
Follow all Safety Precautions when working on an airbag. Refer to AIRBAG SYSTEM SAFETY PRECAUTIONS
-- Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
-- Remove the front seat. Refer to FRONT SEAT
-- Attach the seat to the fixture for seat repair VAS 6136.
-- Remove the front seat belt latch FRONT SEAT BELT LATCHES
-- Remove the tunnel-side trim. Refer to TUNNEL SIDE TRIM .
Passenger Seat Without Height Adjustment
-- Remove the backrest adjustment wheel BACKREST ADJUSTING WHEEL
-- Remove the trim on the door sill side DOOR SILL SIDE TRIM, PASSENGER SEAT WITHOUT HEIGHT ADJUSTMENT
Passenger Seat with Pass-Through
-- Remove the trim on the door sill side DOOR SILL SIDE TRIM, PASSENGER SEAT WITH PASS-THROUGH
Seats With Manual Height Adjustment
-- Remove the backrest adjustment wheel BACKREST ADJUSTING WHEEL
-- Remove the trim on the door sill side DOOR SILL SIDE TRIM, FRONT SEATS WITH MANUAL HEIGHT ADJUSTMENT
Power Driver Seat
-- Remove the trim on the door sill side DOOR SILL SIDE TRIM, POWER DRIVER SEAT
-- Disconnect the two backrest motor wiring harnesses on the bottom side of the seat frame. Detach the wiring harnesses from the seat frame.
All Vehicles
-- Remove the backrest. Refer to BACKREST
-- Remove the lumbar adjustment lever, if equipped LUMBAR ADJUSTMENT LEVER
-- Remove the backrest and folding table, if equipped BACKREST FOLDING TABLE
-- Remove cover and upholstery from front seat backrest FRONT SEAT BACKREST COVER AND CUSHION
-- Separate wiring harness -1- from backrest frame.
-- Remove the bolt -2- (9 Nm).
-- Remove side airbag -3- from mounting in backrest frame.