Special Tools

Special tools and workshop equipment required 

• Carrier Bearing Installation Tool 3350
• Thrust Piece T10266
• Tube 60 mm Dia. VW 415 A
• Base Block VW 441
• Gearbox Holder 2004/1
• Thrust Plate 2050
• Thrust Pad 3062
• Press Support 3118
• Thrust Washer 3401
• 2-Arm Puller 20/10
• Thrust Pad Con. 8/65 VW 433
• Support Channels VW 457
• Thrust Pad VW 510
• Holding Fixture VW 801
• Thrust Pad 30-11
• Thrust Piece 40-105
• Tapered Roller Bearing Puller V.A.G 1582
• Attachment to V.A.G 1582 V.A.G 1582/4
• Grip V.A.G 1582/7
• Press Appliance VW 459
• Split Tube VW 463/2
• Thrust Piece VW 473
• Front and Rear Bearing Tool 3348
• Tube Trans. Drive Shaft VW 426
• Pulling Hook T20143/1
  Fig 1: Extractor Hook T20143

  Courtesy of AUDI OF AMERICA, LLC
• Thrust Piece T10233
  Fig 2: Identifying Thrust Piece T10233

  Courtesy of AUDI OF AMERICA, LLC

Fig 3: Identifying Special Tools -- Transmission

Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

• Thrust Plate VW 401
• Thrust Plate VW 402
• Punch VW 407
• Punch VW 408 A
• Thrust Disc VW 412
• Thrust Tube VW 454

Fig 4: Identifying Special Tools -- Transmission

Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

• Thrust Tube VW 455
• Sleeve VW 519
• Press Tube 2040
• Pressure Washer 3074
• -1- Kukko Extractor 14.5-18.5 mm21/2
• -1- Kukko Extractor 37-46 mm 21/5
• -1- Kukko Extractor 37-46 mm 21/6
• -1- Kukko Extractor 46-58 mm 21/7
• -1- Kukko Extractor 56-70 mm 21/8
• -1- Kukko Extractor 56-110 mm 21/89
• -2- Kukko Puller 65-160 mm 18/1
• -3- Kukko Separating Tool 22-75 mm 17/1
• -3- Kukko Separating Tool 22-115 mm 17/2
• -4- Kukko Support 22/1
• -4- Kukko Support 22/2
• -4- Kukko Support 22/4

Fig 5: Identifying Special Tools -- Transmission

Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

• Thrust Pad 16.5/28 mm Dia. VW 431
• Arbor 50 mm Dia. VW 432
• Thrust Pad VW 447 i
• Tube 42 mm Dia. VW 516
• Thrust Pad 30-205
• Thrust Piece 40-105