Transmission, Securing To Assembly Stand

WARNING: This page is about a different variant/trim than selected.

NOTE:

Remove the necessary special tools used for the procedures in the "assembly sequence", refer to TRANSMISSION, ASSEMBLY .

Fig 1: Attaching Transmission To VW 353 With Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Attach the transmission to the transmission supportVW 353 with the bolts -arrows-.

Fig 2: Identifying Holes -1 And 2-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Use holes -1 and 2-.