Tightening Specifications

WARNING: This page is about a different variant/trim than selected.

Fig 1: Check Alignment Sleeves For Centering Engine/Transmission

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Item	Bolt	Quantity	Nm
1	M12 x 50	2	80
2	M12 x 165	2	80
3	M10 x 50	2	40
4	M10 x 68	1	40
5	M12 x 65	1	80

-A and B- : Alignment sleeves

Fig 2: Identifying Transmission Mount To Transmission Mount Bracket Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Replace the bolts.

Tighten the bolts -arrows- to 60 Nm + 90° (1/4) additional turn.

NOTE:

Install the engine/transmission mount free of tension. Refer to Description and Operation .

Ground Cable Bolt/Nut to Transmission

Fig 3: Identifying Ground Cable - 1- Bolt/Nut

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the ground cable -1- bolt/nut to 20 Nm