Shift Knob, Boot And Noise Insulation
WARNING: This page is about a different variant/trim than selected.
- Emblem
- Can be carefully pried off a plastic or leather shift knob.
- Shift Knob
- With the boot.
- The shift knob and boot cannot be separated from each other.
- Always replace together.
- Removing and installing, refer to SHIFT KNOB, BOOT AND NOISE INSULATION .
- Clamp
- For securing the shift knob to the shift lever.
- Always replace
- Secure to the shift knob using the hose clamp pliersV.A.G 1275.
- Center Control Cover
- Available as a separate part only on some equipment levels.
- Noise Insulation
- Not on all vehicles.
- Arrow on the noise insulation points in the direction of travel.
- Retaining tab spacing varies, therefore can only be arranged in one position.