Haldex Clutch Pump -V181-: Removing

-- Turn off the ignition.

-- Place a drip tray underneath.

-- Remove the drain plug -A- and completely drain the high performance gear oil for Haldex coupling.

Fig 1: Identifying Oil Drain Plug

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the drain plug -A- with a new seal and tighten it to 30 Nm.

-- Disconnect the Haldex Clutch Pump -V181- connector -arrow- from the All Wheel Drive Control Module -J492-.

Fig 2: Clipping Wiring Harness To Haldex Clutch Securely And Placing Connector On Control Module

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the wiring harness from the housing.

-- Place a drip tray under the final drive.

-- Remove the bolts -1- for the Haldex Clutch Pump -V181-.

Fig 3: Haldex Clutch Pump V181

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the Haldex Clutch Pump -V181- -arrow- from the Haldex clutch housing.