LOWER TIMING CHAIN COVER (GLI from MY 12): Notes
WARNING: This page is about a different car, the 2013 Volkswagen Jetta and 2012 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Counter Hold Tool T10355
- Thrust Piece T10368
- Torque Wrench (5-50 Nm) V.A.G 1331
- Torque Wrench (40-200 Nm) V.A.G 1332
- Engine Support Bridge10 - 222 A
- Spindle10 - 222 A /11
- Engine Support Bridge - Engine Support 2810 - 222 A /28
- Fuel Injection Gauge Kit - Fuel Bleeder 3110 - 222 A /31
- Rail with Holes T40091/2 from Engine Support Basic Set T40091
- Mount T40093/5 from Engine Support Supplement Set T40093
- 2 x Engine Support Adapter10 - 222 A /28-2
- 2 x Square Pipe T40091/1 from Engine Support Basic Set T40091.
- 2 x Movable Joint T40091/3 from Engine Support Basic Set T40091.
- 2 x Movable Joint T40093/4 from Engine Support Supplement Set T40093.
- Bits T10099
- Silicone Sealing D 174 003 A3
- Flat Scraper
- Hand Drill with Plastic Brush Attachment
- Protective Eyewear
- Feeler Gauge