LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2011 >> Jetta Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (2.0L - Turbocharger, Supercharger - Engine Code(S): CBFA & CCTA (Sedan)) >> 21 Turbocharger, Supercharger >> Removal And Installation >> Charge Air Regulation Vacuum Diaphragm >> Removing

Charge Air Regulation Vacuum Diaphragm: Removing

WARNING: This page is about a different car, the 2013 Volkswagen Jetta and 2012 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the turbocharger. Refer to TURBOCHARGER .

-- Remove the circlip -arrow- from the vacuum diaphragm linkage.

Fig 1: Identifying Circlip -Arrow- From Vacuum Diaphragm Linkage
GWWN21-10202Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the vacuum line -2- from the vacuum diaphragm -1-.

Fig 2: Identifying Vacuum Diaphragm Bolts -Arrows- And Diaphragm -1- From Turbocharger
GWWM21-0189Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the vacuum diaphragm bolts -arrows- and diaphragm -1- from the turbocharger.