Test Conditions
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- Voltage supply OK. Refer to FUEL PUMPS, CHECKING FUNCTION AND POWER SUPPLY, VEHICLES WITHOUT Fuel Pump Control Module -J538- .
- Fuel pressure OK. Refer to FUEL PRESSURE, CHECKING .
- The battery voltage must be at least 11.5 V. Charge if necessary. Refer to [For transmission(s) 0A4, 02E, 09G, 02Q] Description and Operation .
- Fuel Pump Control Module -J538- fuse OK. Refer to appropriate System Wiring Diagram Information
- Fuel Pump Control Module -J538- is OK see Vehicle Diagnostic Tester.
- Fuel Pump Relay -J17- OK see Vehicle Diagnostic Tester.
- Fuel pump fuse OK. Refer to appropriate System Wiring Diagram Information
- Pull on the connector without pressing the release to make sure the connection is secure. Repeat the fuel pump functionality test if the connector was not connected correctly.
- Fuel level inside the fuel tank is above reserve