Version 1

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Coupling

GWWN20-10884

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Right and left coupling with release buttons -arrows-.

Opening

Fig 2: Identifying Lever

GWWN20-10907

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

It is necessary to counterhold the fuel separating point -1- inside the engine compartment.

-- Insert the Lever - Fuel Line T10468 between the heat shield and the fuel line stop -arrow- -2- and counterhold it.

Continue for all separation points on the fuel system:

Fig 3: Identifying Coupling

GWWN20-10883

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the connector coupling -1- in direction of -arrow A-.

-- Press the release button and hold it down.

-- Disconnect the connector coupling -1- from the fuel line -2- in direction of -arrow B-.

Follow the color coding when installing. Refer to Coupling Allocation .

The connector couplings must >>audibly<< engage when locking.

-- Pull on the connector coupling to make sure it is secure.