Coolant Fan -V7- AND Coolant Fan 2 -V177-

WARNING: This page is about a different car, the 2013 Volkswagen Jetta and 2012 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Torque Wrench V.A.G 1783

Removing

-- Remove the fan shroud. Refer to FAN SHROUD .

-- Disconnect the connector -1-.

Fig 1: Identifying Coolant Fan Connector And Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Free up the electrical wires.

-- Remove the nuts -arrows- and remove the Coolant Fan -V7- and Coolant Fan 2 -V177-.

Installing

Install in reverse order of removal.

Tightening specifications , refer to RADIATOR, FAN SHROUD AND COOLANT FANS OVERVIEW .