Overview - Rear Lid Hinge

Fig 1: Rear Lid Hinge Assembly Overview

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Rear Lid
- Removing and installing, refer to REAR LID .
- Adjusting, refer to REAR LID, ADJUSTING .
Screw
- Tightening specification: 9 Nm.
- 2 per hinge
Hinge
- Removing and installing, refer to REAR LID HINGE .
- Removing and installing, the hinge cover, refer to REAR LID HINGE COVER .
Gas-Filled Strut
- Removing and installing, refer to REAR LID GAS-FILLED STRUT .
- Releasing the gas, refer to REAR LID GAS-FILLED STRUT, RELEASING GAS .
Electric Wire
- Clipped to the hinge
Screw
- Tightening specification: 9 Nm.
- Quantity: 4 on each hinge
Spring
- Left and right
- Engaged in the left hole -arrow-