LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2011 >> Jetta Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels (Hood, Lids) (Sedan) >> (55 Hood, Lids) >> Description And Operation >> Overview - Hood Release Lever And Bracket

Overview - Hood Release Lever And Bracket

Fig 1: Hood Release Lever And Bracket Assembly Overview
GWWM55-10033Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Bracket
  2. Cable
    • Installing:

      -- Install the ball on the end of the cable into the retainer on the bracket.

      -- Clip the cable into the bracket.

  3. Expanding Nut
    • Quantity: 2
  4. Screw
    • Tightening specification: 1.5 Nm
    • Quantity: 2
  5. Release Lever
scientia non olet · About LEMON Manuals