Hood Cable, Disconnecting

Fig 1: Hood Release Cable, Disconnecting

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Perform the following:

-- Open the hood.

-- Remove the cover for the cable coupling -2- above the headlamp on the driver side from the lock carrier.

-- Remove the cover -2- from the cables -1- and -3- -arrows a-.

-- Move the cable -1- 90° in direction of -arrow b- and then remove it -1- from the its retainer -3- in direction of -arrow c-.

NOTE:

Make sure the grommets -4- and -5- are installed correctly when installing the cable -3-.

Before closing the hood, make sure the hood release lever and the cable are working correctly.